“HK-8SS轻便型自动焊接小车”参数说明
品牌: | AFM | 输入电压: | 220 |
工作台直径: | - | 电机功率: | 30W |
承载能力: | 25kg | 焊枪调整角度: | 360 |
外形尺寸: | 280*210*235 | 重量: | 7.6kg |
型号: | HK-8ss | 规格: | HK-8ss |
包装: | 纸箱 | 产量: | 10000 |
“HK-8SS轻便型自动焊接小车”详细介绍
·该机体积小,重量轻,易于移动和安装。·小车采用防尘、防磁化的传动系统置于内部,结构简洁,使用寿命长·采用四轮同时驱动,胶轮材质好,耐高温,焊接行走平稳·强力永磁配合导向轮让小车始终紧贴焊道,焊接准确无误·采用齿轮传动方式,避免传统链条传动方式有松动间隙,行走有抖动的现象·可进行垂直角焊,适用于加强件等的交叉部位的焊接·广泛用于船舶、桥梁、机车、石油化工、钢结构工程等
Small volume, light weight, and easy for movement and installation. Adopting built-in dustproof and anti-magnetization transmission system, simple structure, and long service life. Adopting synchronous four-wheel drive, with rubber tires featuring excellent materials, high temperature resistance, and steady welding movement. The mighty permanent magnet guide wheel enables the trolley to always adhere to the welding bead closely, guaranteeing precise welding. Adopting gear drive and avoiding the phenomenon that traditional chains have looseness and vibration in running. Can deliver vertical angle welding and horizontal angle welding, and suitable for welding of cross section of reinforcer, etc. Widely applied to ship, bridge, engine, petrochemical complex, and steel structure work, etc.
型号Model | 机身外形尺寸 L*W*H MM | 输入电压Voltage V/HZ | 焊枪调整范围 | 行走速度Speed | 驱动方法Method of driving | 重量Weight | |||
上下Up down | 前后Forwardbackward | 作业角Work angle | 进行角Proceeing angle | ||||||
HK-8SS | 280*210*235 | AC220/50 | 50mm | 50mm | 360° | 10° | 0-900mm/min | 四橡胶轮驱动 | 7.6kg |
HK-8SS-A | 290*230*335 | AC220/50 | 50mm | 50mm | 360° | 10° | 0-900mm/min | 四橡胶轮驱动 | 8.8kg |